Disinfection where it matters most — where germs hide out of sight.
Drains and pipework are one of the most overlooked sources of contamination — yet they are a key breeding ground for bacteria, fungi, viruses, and biofilms. Warm, damp conditions combined with organic waste create biofilms—protective layers where harmful pathogens thrive and resist standard cleaning.
These contaminants can spread through splashback onto surrounding surfaces or cause persistent, unpleasant odours.
SANI-99™ SteriDrain Pro is specifically designed for drainage systems, delivering deep biofilm penetration to break down these layers and eliminate hidden pathogens that conventional cleaners cannot reach.
Why SANI-99™ SteriDrain Pro is Better for Drains & Pipes
|
Feature |
SANI-99™ SteriDrain Pro |
Traditional Drain Cleaners (Bleach/Chlorine/Acids) |
|---|---|---|
|
Biofilm Control |
Penetrates & disrupts biofilms at source |
Limited surface-level action |
|
Pathogen Kill Rate |
Log 7 (99.99995%), effective even within biofilms |
Often limited, inconsistent within biofilms |
|
Contact Time |
5–10 minutes (routine) |
Typically longer with variable results |
|
Residues |
Breaks down cleanly, no harsh odours or residues |
Strong chemical smell, corrosive residues |
|
Infrastructure Safety |
Non-corrosive, safe for pipework and systems |
Can damage pipes, seals, plastics, and metals |
|
Safety Profile |
Non-hazardous at use dilution, low PPE requirement |
Harsh chemicals, requires PPE |
|
Applications |
Drains, U-bends, pipework, gullies, waste outlets |
Limited use, risk of material damage |
|
Sustainability |
Chlorine-free, biodegradable, low carbon footprint |
Chlorine by-products, higher environmental impact |
Where It Works Best
Kitchen sink drains & U-bends
Bathroom sinks, showers & tubs
Floor drains/gullies
Toilet waste outlets
Damp utility pipes & storage areas
How it Works
SANI-99™ SteriDrain Pro uses a multi-oxidant system to penetrate and disrupt biofilms—reaching pathogens hidden within slime layers inside drains and pipework. Once inside, it eliminates bacteria, viruses, fungi, and C. difficile spores, helping to reduce regrowth and remove odours at the source.
Chlorine-free, non-corrosive, and biodegradable, it delivers powerful disinfection while remaining safe for pipework, infrastructure, and the environment—unlike harsh acid or bleach-based cleaners.
How Fast Does SANI-99™ Work?
- Bacteria (E. coli, Staph, Pseudomonas) — killed in 10–60 seconds.
- Viruses (Norovirus, Coronaviruses, Influenza) — neutralised in under 5 minutes.
- Fungi & Moulds (Candida, black mould) — destroyed in 15 minutes.
- Spores (Clostridioides difficile) — eliminated with 15-minute contact time.
Where Germs Hide in Your Drain & Pipes
How to Use
Using SANI-99™ SteriDrain Pro in drains and pipework is quick and effective. It is specifically designed to penetrate biofilms and eliminate hidden contamination at the source.
- Add 1 sachet directly into the drain or dissolve in 1 litre of warm water
- Allow 5–15 minutes contact time
- Flush through thoroughly with warm water
For routine maintenance, use regularly to help prevent biofilm build-up and odours. For heavy contamination or high-risk areas, use a higher dose or repeat treatment as required.
Note: For heavy biofilm or persistent odour build-up, carry out a deep treatment using 2 sachets, allowing at least 15 minutes contact time before flushing. Repeat weekly or as required to maintain control.
Pro Tips
Use regularly to help prevent odours and build-up
For stubborn smells or build-up, leave for 15 minutes before flushing
Focus on U-bends and plugholes, where residue collects
Works well in kitchen and bathroom drains
Always flush through with warm water after use
Keep sachets handy for quick, mess-free dosing
Protect your home from hidden drain germs with proven disinfection.